Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Roof Replacement & Installation in Sunrise Manor: What to Know First
We provide independent Therma-Tru roof replacement & installation in Sunrise Manor, and most full roofs are completed in one to three days depending on square footage, pitch, and material. As an independent Therma-Tru service provider, we’re not affiliated with or authorized by Therma-Tru, but our technicians have up to 15 years working on these assemblies. Prices are quoted upfront in writing, line by line, with no change orders once the job starts. If you own a Therma-Tru entry door, patio door, or sidelight system and your roof is due, call (844) 761-9603 and a live person answers, day or night.

This page is for Sunrise Manor homeowners who’ve already made a real investment in Therma-Tru products and want the roof above those openings handled with the same care. A roof replacement touches every door threshold and window head in the house. Get the flashing and weather barrier wrong and the door you paid for starts leaking at the sill within two summers.
Key Takeaways
- Therma-Tru doors and roofs meet at the head flashing, and that’s where most Sunrise Manor failures begin.
- Nevada’s high-desert sun and summer monsoon gusts drive heat cycling that cracks sealant around door frames faster than in milder climates.
- We schedule roof work with door protection built in, so your Therma-Tru finish and hardware don’t get chewed up during tear-off.
- Every job we do is backed by the 36500-Day Done Right Promise: if it’s not done right, we make it right.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds a solid door. The failures we see in Sunrise Manor rarely come from the door slab or the frame itself; they come from the roof-to-door intersection, sun exposure, and how the original installer detailed the opening. Here are the five we run into most.
- Head flashing that was never integrated into the roof underlayment. On Fiber-Classic and Smooth-Star entry systems, the door’s brickmould and head trim are often installed after the roof was already closed up. That means the flashing sits on top of the weather barrier instead of woven in. Rain runs behind it and shows up as staining on the interior head jamb. When we replace the roof, we pull the head trim, integrate new flashing into the underlayment, and reset the trim with a proper backer bead.
- Sun-driven sealant failure at the door-to-roof transition. Sunrise Manor sits in a stretch of the valley where summer surface temps on a dark roof can climb well past 150°F. Standard painter’s caulk at a door head lasts maybe two seasons. We see cracking and pull-away on door frames all along Lamb Boulevard and the older tracts off Nellis. Our fix uses an elastomeric, UV-stable sealant rated for high movement, and we don’t skip the backer rod.
- Drip cap missing or under-lapped on Smooth-Star patio doors. The drip cap over an exterior door assembly is a small piece of metal that does the biggest job on the wall. When it’s under-lapped or pitched wrong, water tracks down the door face and works into the threshold. On roof replacements we check every drip cap and re-set any that are flat or short.
- Stucco-to-door-frame cracking after a re-roof. Most Sunrise Manor homes are stucco over frame. Tear-off vibrates the wall, and old caulk joints at Therma-Tru frames open up. We pre-cut and re-caulk every door and window joint after the roof is on, not before, so the sealant cures in its final position.
- Threshold and sill pan issues on Therma-Tru fiberglass door systems. A sill pan that drains backward or has no slope holds water against the bottom of the door. We see this often on doors that were set on a flat concrete slab with no pan at all. During roof work we can’t always reset the door, but we can flag it, and if the sill is compromised we quote the correction in the same written estimate.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Roof Replacement & Installation Process
Roof work on a home with Therma-Tru doors and windows has a few extra steps compared to a plain re-roof. Here’s what a job looks like from your first call to the final walk-through.
- 1
On-site diagnostic. We inspect the roof from the deck up, check the condition of every door head, drip cap, threshold, and window head within the work zone, and photograph what we find. You see the same photos we do.
- 2
Written, line-item estimate. Materials, labor, tear-off, disposal, and any door-and-window protection are broken out. No lump-sum number, no vague “allowances.” Free second opinion on any written estimate you already have.
- 3
Parts decision. For any Therma-Tru component that has to come off during the roof work (drip caps, head trim, brickmould), we talk through OEM versus quality aftermarket. OEM keeps the finish and profile exact; aftermarket can be faster and less expensive but may not match the original color. You decide with the numbers in front of you.
- 4
Tear-off and inspection. Full tear-off, not a layover. We inspect the decking, replace any soft sheathing, and check that the door head flashing is ready to be re-integrated correctly.
- 5
Install and detail. Underlayment, flashing, roofing material, and then re-set the door trim and re-caulk every adjacent joint. Every Therma-Tru door and window in the work zone is masked and protected while we’re on the roof.
- 6
Water test and cleanup. We run water at the door head and check for intrusion, do a magnet sweep for nails, and walk the property with you before we consider the job closed. If anything isn’t right, the 36500-Day Done Right Promise means we come back and fix it.
See the difference
Before
After
Before
After
Before
AfterWhat Therma-Tru Roof Replacement & Installation Costs in Sunrise Manor
Cost depends on roof size, pitch, material, and how much door and window detailing is involved. Here are the ranges Sunrise Manor homeowners typically see on a written estimate.
| Scope | Typical Range |
|---|---|
| Partial roof section replacement (under 20 squares, architectural shingle) | $4,800 – $9,200 |
| Full architectural shingle roof replacement (single-story, standard pitch) | $11,000 – $19,500 |
| Full tile roof replacement (concrete or clay) | $18,000 – $34,000 |
| Metal roof replacement (standing seam) | $22,000 – $42,000 |
| Door head flashing re-integration and trim reset (per opening) | $220 – $480 |
| Drip cap replacement (per door or window) | $90 – $210 |
| Decking repair, per sheet of sheathing replaced | $65 – $140 |
What moves the price most: roof pitch, number of penetrations, whether tile needs a lift-and-relay, whether door frames require trimming out, and how much decking is soft. We quote all of it before we start. Call (844) 761-9603 for a free estimate; we don’t charge a trip fee inside the home county.
Why Sunrise Manor Homeowners Call Winslow Windows & Doors Sunrise Manor for Therma-Tru Work
We’re locally owned and owner-operated, and Ed’s name is on the door, and on every job we do. That matters when a roof replacement touches the one thing in your home that was specifically chosen and installed. Our technicians have up to 15 years of experience with Therma-Tru assemblies and roof systems, and they arrive background-checked and in uniform, so you know who’s at your door before the truck pulls up.
We install and work alongside PGT, CGI, CWS, and ES Windows products too, which means when a roof issue turns out to be a window or door issue, we don’t hand you off to a third contractor. Upfront pricing, no surprises on the invoice. A live person answers the phone every time, 24 hours a day. Seniors and veterans get 10% off permanently, and $40 off any repair over $200, with no expiration.
FAQs
Not if the roof work is done correctly. Therma-Tru’s warranty covers the door assembly itself, and normal roof work around a properly flashed door head doesn’t affect it. What can affect it is a roof installer who cuts into the door frame, uses the wrong fasteners through the brickmould, or leaves the head flashing improperly integrated. We document the condition of every Therma-Tru opening before and after the job, so you have a record. Call (844) 761-9603 for a free estimate.
Usually, yes. We can source OEM head trim, brickmould, and drip cap to match your original finish. On older Therma-Tru colorways, the wait can run a few weeks, which is why we always quote the aftermarket option alongside so you can weigh the timing. We won’t install a mismatched part without telling you first.
If the failure is localized to the flashing at the door head and the surrounding shingles are in good shape, a section repair makes sense and usually runs $4,800 to $9,200. If the roof is 15-plus years old, has multiple soft spots, or the door-head leak has been going on a while, a full replacement is the better call. We’ll tell you plainly which one applies, based on what we see, not what’s more profitable.
Most full roof replacements run one to three days. Partial sections over a single door or patio assembly are typically done in a day. Weather and inspection scheduling can push it, and we’ll give you a firm window in writing before we start.
Head flashing that was installed after the roof was closed up, so it sits on top of the weather barrier instead of woven in. It’s extremely common on homes built in the 1990s and early 2000s around Sunrise Manor, and it’s the number one cause of door-head leaks we’re called out for. Call (844) 761-9603 if you’re seeing staining on an interior head jamb.
If your roof is aging and you’ve got Therma-Tru doors or windows underneath it, call (844) 761-9603 for a free estimate. A live person answers, day or night, and we’ll walk the roof with you and quote it line by line. We’re the neighbor down the road.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.