A Winslow company - serving Sunrise Manor, NV
T

Therma-Tru Door Installation in Sunrise Manor, NV

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

Therma-Tru Door Installation: The Sunrise Manor Owner’s Guide

Therma-Tru door installation in Sunrise Manor typically runs $650 to $1,850 for a single pre-hung entry door, and most of our Sunrise Manor door installs are scheduled within a few business days, not weeks. If you’re reading this, your door is probably telling you something already: it sticks in July, daylight shows at a corner, the deadbolt needs a shoulder to throw. You may have bought a Therma-Tru door online or inherited one with the house and can’t find a local pro willing to install a door they didn’t sell. We install Therma-Tru doors and we know the product line, its sizing quirks, and how Nevada’s heat and monsoon swings wear it. This page tells you what fits, what fails, what it costs, and where DIY stops being a good idea.

Modern floor to ceiling glass sliding patio doors in luxury home in Sunrise Manor, NV

Call (844) 761-9603

Which Therma-Tru Models This Applies To

Therma-Tru makes entry doors across several lines, and the two that show up most in Sunrise Manor homes are the Fiber-Classic and Smooth-Star series. Fiber-Classic doors carry the woodgrain texture; Smooth-Star is the flat, paintable, fiberglass skin. Both are sold as slabs or pre-hung units, and the difference matters at order time: a pre-hung unit arrives square in its frame with hinges and the lockset bore already aligned, while a slab goes into your existing jamb and only works if that jamb is still square. In Sunrise Manor homes from the 1990s and 2000s, a lot of jambs have moved enough that a slab install will fight you.

To identify what you have, look for the Therma-Tru certification label on the hinge edge of the door or on the frame’s weatherstrip channel. It lists the series, the door size (most entries are 36 by 80 inches, though 32-inch and 34-inch widths are common on older Sunrise Manor houses), the handing, and the rated assembly info. Measure the slab width, height, and thickness yourself before anything is ordered; nominal sizes and actual sizes differ by fractions that decide whether a replacement fits.

On the OEM-versus-aftermarket question: Therma-Tru’s own lock bore and hinge prep spacing is proprietary enough that aftermarket knockoff doors often don’t line up with Therma-Tru’s hardware patterns. For the door itself, we install the genuine product. For hardware, weatherstripping, and sweeps, quality aftermarket equivalents are fine and often a better value if you’re paying out of pocket.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Signs Your Therma-Tru Door Installation Is Failing

  • The door binds or sticks in summer. Fiberglass slabs expand slightly in sustained heat, and Sunrise Manor routinely sits above 105°F in July. A door hung with tight margins in spring will drag a sixteenth of an inch in August, which is usually a hinge or frame plumb issue, not the slab going bad.
  • Daylight or hot air at the corners. That’s weatherstripping compression loss or a frame that’s shifted out of square. Desert dust and heat cycle the seal and the jamb separately, so gaps open at the top corners first.
  • The deadbolt drags or won’t throw without a push. The strike plate has drifted or the door has settled. On pre-hung units this can signal hinge-side frame movement; on slab installs it’s usually the old jamb failing around the hinge screws.
  • The threshold sweep comes loose or tears. Sunrise Manor’s spring dust storms and monsoon grit chew the bottom sweep faster than most climates. A torn sweep is a real water and pest path, not cosmetic.
  • Moisture staining or soft wood under the door. That’s the rough sill and subfloor, and it’s the one symptom that turns a door swap into a carpentry job. In Sunrise Manor monsoon exposure through a worn sweep is the usual culprit.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for a Therma-Tru entry door in Sunrise Manor depends mostly on door line, size, and whether the existing frame survives. Here’s the honest breakdown:

Scope Typical Installed Range
Pre-hung Fiber-Classic or Smooth-Star entry, standard 36×80, no rot $650 – $1,100
Pre-hung entry with sidelites or a larger unit $1,100 – $1,850
Slab replacement into a sound existing frame $450 – $750
Rough sill repair or reframing where rot is found Quoted as a written line item before we cut

Those ranges include removal and disposal, setting and shimming the unit plumb and square, hardware reinstallation, finish sealing, and cleanup. Hardware itself (handleset, deadbolt) is priced separately if you’re replacing it. We give you a written, line-item estimate before any work starts, so you can see parts and labor separately and hold us to the number. Our work is backed by the 36500-Day Done Right Promise: if it isn’t done right, we make it right. Because of Sunrise Manor’s heat load, we pay particular attention to the seal and the threshold sweep here; a door installed without that attention will leak hot air within a year.

DIY or Call Us?

You can safely handle the checks: tighten hinge screws, look at the weatherstripping for flat spots, feel for daylight at the perimeter, test the deadbolt throw, and note whether the door binds only in the afternoon or all day. Take a photo of the certification label too, since that saves us a trip and tells us which pre-hung unit we need.

Where DIY goes wrong on a door is the frame. Setting a pre-hung unit plumb and square in an existing rough opening, then getting the gap and the lockset alignment right, is a tolerance game measured in sixteenths of an inch. Homeowners who try to skip the frame work end up with a door that closes but doesn’t seal, or a deadbolt that doesn’t throw, and they pay us to do it twice. No trip charge inside the home county, and we’ll second-guess any written estimate you already have for free. Call (844) 761-9603 to schedule your free estimate.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (844) 761-9603
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Winslow Windows & Doors Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch