Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateWhy Sunrise Manor Homeowners Choose PGT Windows & Doors
We service and install PGT windows and doors across Sunrise Manor, NV as an independent PGT service provider. We’re not affiliated with or authorized by PGT, and we say so plainly. What we bring instead is hands-on time with the exact PGT lines that fill Southern Nevada homes, including impact-rated WinGuard and EnergyVue, so we know how they actually behave in desert heat and monsoon wind-driven rain.

Sunrise Manor is full of PGT product, and much of it is now showing its age. The mid-century tract homes built largely in the 1960s and 70s sit under a sun that delivers more than 290 days of sunshine a year, with summer highs often past 105°F. That combination pushes seals, frames, and hardware harder than the manufacturer’s spec sheet accounts for. Along the eastern edge near Frenchman Mountain, west-facing windows take the worst of the afternoon sun, and we see seal failure and frame warping there earlier than anywhere else in the valley.
One call reaches us at (844) 761-9603, day or night, and a live person picks up. No voicemail loop, no callback queue.
Why Trust Winslow Windows & Doors Sunrise Manor for Your PGT Windows & Doors?
Our technicians have up to 15 years of experience, and a good share of that has been spent on PGT aluminum, vinyl, and impact frames that are already installed in Sunrise Manor homes. They know the difference between a bad roller and a track that’s out of square, and they know when a fogged WinGuard unit is a glass swap and when it’s a sign the whole opening needs attention.
Parts matter. We source OEM PGT parts whenever they’re available for critical components like impact-rated glass and proprietary hardware. When they aren’t, we use quality aftermarket equivalents that meet or exceed original specifications, and we tell you which is which before we order. We don’t claim to stock PGT parts locally, because we don’t. We identify what’s needed on site, then source it for that specific job.
Service is warranty-safe by design. We document what we remove, we don’t cut or modify frames in ways that void coverage, and we photograph the work before closing it up. Winslow Windows & Doors has been locally owned and owner-operated since 2011, with a published address and license number, and every job carries the 36500-Day Done Right Promise. If it’s not done right, we make it right. Every technician is background-checked and arrives in uniform.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common PGT Windows & Doors Problems We Fix in Sunrise Manor
PGT builds solid product. Nothing about a failure here means the window was cheap. It means desert conditions are relentless, and certain parts of certain lines fail in predictable ways. These are the calls we run most often in Sunrise Manor.
- Fogged insulated glass units in WinGuard and EnergyVue windows. That hazy film between the panes is a failed IGU seal, and it’s the number-one PGT complaint we hear. Thermal stress from sun cycling plus UV exposure breaks down the perimeter seal over time. It’s cosmetic at first, then it starts cutting down the window’s insulating value. On impact units, a failed seal also weakens the edge laminate, so it’s worth addressing before it spreads.
- Sliding glass door hardware that binds and drags. PGT sliding doors, including the WinGuard impact sliders, run on roller assemblies that collect fine desert grit. Add heat expansion and the track starts fighting the panel. When a door gets hard to open, the cause is usually worn rollers before it’s ever the track itself, though a bent or worn track follows close behind if the rollers are ignored.
- Water infiltration during monsoon season. Vegas Valley storms dump rain fast, and PGT frames shed it through weep holes and sealant lines. Clogged weep holes or cracked sealant around sills lets water push inside, often showing up as staining on interior drywall or a soft spot at the sill. This is one of the more common issues on Sunrise Manor’s older stucco homes, where sealing details around the opening have aged out.
- Laminate delamination on older WinGuard impact glass. The plastic interlayer in impact glass can separate at the edges after enough heat cycling, and you’ll see a milky edge or bubbling along the frame. Once the laminate breaks down, the unit loses impact resistance, which is the whole point of owning it. This one isn’t cosmetic.
- Sticking casement and hung-window hardware. Locks, hinges, and cranks in PGT casement and single-hung units seize up from grit and heat. A crank that takes two hands or a lock that won’t catch is a hardware failure, not a window that’s “just old.” Replacing the hardware usually brings the window back to full operation.
A common scenario here: a homeowner notices a PGT WinGuard sliding glass door getting harder to open while the glass develops a hazy film between panes. The usual cause is worn roller assemblies paired with a failed IGU seal from years of heat cycling. A qualified local pro typically replaces the rollers, swaps the sealed unit if fogging is extensive (matching the original impact rating), then adjusts the track and checks drainage so water doesn’t find its way in later.
PGT Parts & Our Repair-vs-Replace Approach
For PGT windows with structural or glass seal failure, we assess repair versus replacement honestly, and we’d rather fix what’s fixable. Glass and hardware can often be replaced on their own. If the frames are damaged, or if multiple units in the same wall are failing at once, full-frame replacement frequently costs less over the next decade than patching one unit at a time. We’ll show you both numbers in writing before you decide.
OEM parts come first for impact glass and proprietary hardware. Quality aftermarket equivalents cover the rest when OEM isn’t available. Either way, you know which you’re getting and why.
If your PGT window is fogged, sticking, or leaking in Sunrise Manor, call (844) 761-9603 for a free estimate. We’ll tell you straight whether it’s a repair or a replacement.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place, check the IGU seal, test hardware operation, and look at drainage and sealant around the frame. On impact units we check the laminate edge for breakdown. You get a written line-item quote with upfront pricing and no surprises on the invoice.
- 2
Repair or install. For repairs, we replace the failed component, OEM or equivalent, and match impact ratings on glass. For full-frame replacement, we pull the permits and set the new PGT unit with fresh flashing and sealant suited to Sunrise Manor’s stucco exteriors and low-pitch rooflines.
- 3
Test. Every job gets cycled and checked. Sliders roll, locks catch, weep holes drain, and we water-test where infiltration was the complaint.
- 4
Warranty. We document the work and back it with the 36500-Day Done Right Promise. Permits are pulled and inspections passed where required.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Sunrise Manor
We handle the PGT lines you’ll actually find in Southern Nevada homes. That includes the WinGuard Impact Series in aluminum or vinyl, which we install and service with the original impact rating preserved. We work on EnergyVue Series vinyl single-hung, double-hung, and sliding windows, the Aluminum Series custom windows and doors, and PGT sliding glass doors including the WinGuard impact sliders.
Impact-resistant windows, window maintenance and care, and full-frame replacement are the sub-services we’re called for most on PGT product in Sunrise Manor. Desert maintenance matters on all of them, and we’ll tell you what a given window realistically needs rather than what’s easiest to sell.
We Also Service These Brands
PGT isn’t the only brand on these streets. We’re authorized installers for eight premium brands, and in Sunrise Manor we also service and install CGI, CWS, ES Windows, and ECO Window Systems. If one wall of your home has PGT and another has something else, one call covers both. You’re not stuck hunting down a separate specialist for each brand name on your frames.
FAQs – PGT Windows & Doors Service in Sunrise Manor
No. We’re an independent PGT service provider, not affiliated with or authorized by PGT. Our expertise comes from years of hands-on work with the specific PGT lines used in Southern Nevada homes, not from a manufacturer badge. That independence lets us tell you honestly when a repair is the right call and when it isn’t. Call (844) 761-9603 for a free estimate.
We use OEM PGT parts whenever they’re available for critical components like impact-rated glass and proprietary hardware. When OEM isn’t available, we use quality aftermarket equivalents that meet or exceed original specifications, and we tell you which you’re getting before we order. Call (844) 761-9603 to talk through your specific window.
Most single-unit repairs, like a roller swap or a hardware replacement, finish in a single visit once the part is in hand. Glass and IGU replacements depend on sourcing the correct impact-rated unit for your model, which typically takes a few days to a couple of weeks. Full-frame replacements are scheduled jobs with permits. We give you a realistic timeline in the written quote, not a guess on the phone.
We cover the PGT WinGuard Impact Series in aluminum and vinyl, the EnergyVue Series vinyl single-hung, double-hung, and sliding windows, the Aluminum Series custom windows and doors, and PGT sliding glass doors including WinGuard impact sliders. If you’re not sure which series you have, the label on the frame usually identifies it. Call (844) 761-9603 and we’ll help you sort it out.
Proper service doesn’t void your PGT warranty. What voids coverage is unauthorized modification, cutting frames, or using non-compliant glass in an impact opening. We service in a warranty-safe way: we document what we remove, preserve impact ratings on replacement glass, and avoid alterations that would put your coverage at risk. If a repair could affect your warranty, we’ll tell you before we start.
PGT service in Sunrise Manor typically runs from about $150 to $400 for hardware and roller repairs, $300 to $900 per unit for insulated glass replacement depending on size and impact rating, and $900 to $2,200+ per opening for full-frame replacement. The desert sun here drives more seal failures than in milder climates, so glass work is common. Call (844) 761-9603 for an exact quote. Estimates are free.
Most fogged PGT WinGuard impact windows can be repaired by replacing just the sealed glass unit, as long as the frame and laminate edge are sound. If the laminate itself has delaminated or the frame is warped, full replacement is usually the smarter spend. We check both before recommending anything. Call (844) 761-9603 for a free assessment.
Impact windows aren’t universally required in Sunrise Manor the way they are in some coastal markets, but they’re strongly worth having given monsoon wind-driven rain and dust. If your home already has WinGuard units, keeping them impact-rated during repair preserves the protection you paid for. We’ll tell you what your specific opening needs.
PGT EnergyVue vinyl windows in Sunrise Manor need track cleaning every few months to clear abrasive dust, weep-hole checks before monsoon season, and a look at sealant around the frame once a year. Vinyl expands and contracts hard in 105°F heat, so hardware and seals deserve a yearly glance. Call (844) 761-9603 if you’d like us to check them.
Yes, in most cases. PGT Aluminum Series windows are built so the glass can be replaced without pulling the whole frame, provided the correct unit is sourced. We match the original spec, including impact ratings where applicable, and handle the swap. Call (844) 761-9603 for a quote on your specific window.
If the door drags or needs a lift to slide but the track looks straight and clean, it’s usually the rollers. If the track is bent, worn through, or the door jumps the rail, the track is the problem. We check both in one visit and give you the honest call. Call (844) 761-9603 to schedule.
Book Your PGT Service in Sunrise Manor, NV
Whether it’s a fogged WinGuard unit, a sliding door that’s given up, or a full-frame replacement on a west-facing wall, we’re the one down the road. Call (844) 761-9603 for a free estimate on your PGT windows and doors in Sunrise Manor. Live person, day or night. Upfront pricing, written quotes, and the 36500-Day Done Right Promise behind every job.
Written by the team at Winslow Windows & Doors.