Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Impact Garage Doors: The Sunrise Manor Owner’s Guide
If your PGT impact garage door has a cracked panel, a failed roller, a snapped torsion spring, or a bent track, we replace the part with a PGT-compatible component and have most doors rolling again the same day. For a typical Sunrise Manor single-car door, expect $180 to $540 per part installed depending on what failed, and $1,400 to $3,900 for a full impact-rated door replacement. Most owners find us after a slow rattle turns into a hard grind, or after the door stops fully closing during a windstorm warning.

Which PGT Models This Applies To
PGT builds impact-rated garage doors across its residential lines, and the parts you need depend on the door series, panel width, and the hardware that was installed with it. The differences that matter: panel thickness on impact-rated doors runs heavier than a standard door, so rollers, hinges, and springs are rated for a heavier load than a general hardware kit. A roller rated for a 130-pound standard door will fail early on a 200-pound-plus impact door.
To identify your part, look for the manufacturer label on the inside face of the door and the model or series number on the operator arm. Measure the panel height and the door width to the inch. Some PGT impact doors use panel dimensions that don’t match off-the-shelf replacements, so a “close enough” panel often won’t hold the impact rating.
On the OEM-versus-aftermarket question, our honest position for PGT doors: hardware like rollers, hinges, and weather seal can be reliably matched with quality aftermarket equivalents if the weight rating is correct. Panels and structural parts should match the OEM or a verified compatible alternative so the door keeps its impact rating. We do not carry stock and we don’t claim to; we source the right part for your door and bring it with us. Winslow is an authorized installer of PGT products and other premium brands, and we’re an independent service provider, not affiliated with PGT.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your PGT Impact Garage Doors Is Failing
Impact doors in Sunrise Manor live through a harder cycle than most. Summer surface temps on a west-facing door climb high enough to dry out seals and stress the panel skin, and a windy spring can take a toll on hardware already worn. Here’s what typically shows up:
- Door rattles or grinds on the way up. Worn rollers or a bent track are usually the cause; on a heavier impact door, bad rollers wear out faster.
- One side drops or the door hangs crooked. A stretched torsion spring or a broken spring on one side means the door is lifting unbalanced, which loads the opener.
- Water seeps across the floor after a storm. The bottom seal or the threshold weatherstrip has flattened or pulled loose, which is common after a summer of heat cycling.
- A visible crack or chip in a panel. Impact-rated panels handle a lot, but a chip in the skin weakens the impact rating for that panel; it should be replaced, not patched.
- The opener strains or reverses partway. Sometimes it’s the opener, but often the door’s hardware or spring tension has drifted and the opener is fighting the door.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest range for Sunrise Manor, part and labor:
- Rollers or hinges (set): $180 to $340 installed.
- Bottom seal or weatherstrip: $160 to $290 installed.
- Torsion or extension spring replacement: $240 to $480 installed.
- Track section or cable: $220 to $560 installed.
- Impact panel replacement: $380 to $900 installed, depending on panel size and series.
What drives the number: door size, the hardware rating needed for a heavier impact door, and whether a panel has to be matched to the OEM series. We give you a written line-item quote up front, so parts and labor are spelled out and the price doesn’t move once work starts. Every job is backed by our 36500-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
Some things you can safely check yourself: rollers, bottom seals, and weatherstripping. Wiping down the tracks, testing whether the door opens by hand, and looking at a loose seal are all fine.
What we won’t tell you to do yourself: torsion springs and cables. Those carry high tension, and if one lets go, it can cause serious injury. Spring and cable work is a job for a trained technician. We won’t walk you through it over the phone and risk your hands. Our technicians have up to 15 years of experience, and every one of them is background-checked and arrives in uniform, so you know who’s at your door.
Call (844) 761-9603 to schedule your free estimate. A live person answers every call, 24 hours a day.
FAQs
Hardware like rollers and springs typically lasts 7 to 12 years in our climate, shorter on a west-facing door that sees more heat. Seals and weatherstripping usually need attention sooner, often every 3 to 5 years, because summer heat dries the rubber. We’ll tell you at the estimate what’s likely to fail next. Call (844) 761-9603 for an exact quote, estimates are free.
Sometimes yes. A misaligned track or loose hinge can often be fixed rather than replaced. Springs, cables, and cracked impact panels are a different story and usually need replacement. We inspect first and recommend repair when it’s the right call. Call us for a free second opinion on any written estimate.
Most single-part jobs are done the same day, often in under two hours once we’re on site. A full panel replacement or multiple part repair may take longer, and we’ll give you the timeline with the quote. There’s no trip charge inside the home county.
We match the part to your door’s model and series, using OEM or verified compatible alternatives, and bring it with us. We don’t claim to carry stock. If a specific panel has to be ordered, we’ll tell you the lead time up front. We answer every call with a live person. Call (844) 761-9603 to get started.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.