Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Custom & Geometric Windows in Sunrise Manor: What to Know First
Winslow Windows & Doors Sunrise Manor provides independent PGT custom and geometric window work for homeowners here, from arched impact units to oversized shaped openings that need a measured replacement or a careful rebuild. Most custom and geometric projects run several weeks from measurement to install because shaped glass and matching frames are built to order; repairs to existing PGT units are usually handled on a scheduled visit rather than a same-day call. We price upfront with a written line-item estimate and don’t move the number once work starts.

This page is for PGT owners in Sunrise Manor who have a shaped, arched, or oversized window that’s fogged, leaking, sticking, or no longer sealing, and who want a straight answer on whether it can be fixed or has to be replaced. Call (844) 761-9603 and a person answers, any hour.
How PGT Products Fail – and How We Fix Them
PGT builds solid products, but shaped and oversized units run into problems that flat stock windows never see. Here’s what we actually find on PGT work in Sunrise Manor, and what we do about it.
- Arched and radius units losing their seal at the curve (WinGuard series). On curved PGT impact units, the most common failure is the perimeter seal at the top of the arch, where the bent frame carries more stress than the straight legs. Sunrise Manor’s summer heat cycling, with 100°F-plus days and cooler nights, works that seam loose over time and you get fogging between the panes or water tracking in. We re-seal and re-glaze the curve rather than replacing the whole unit when the frame is still true.
- Oversized openings with sagging sashes (PGT Aluminum and WinGuard aluminum lines). Wide geometric openings carry a lot of glass weight, and the hardware takes the load. When rollers or pivots wear, the sash drops and the unit stops latching square. We check the hinge and roller hardware first, because on oversized PGT units the glass is often fine and the hardware is what’s tired.
- Fogged insulated glass in shaped units. When the seal on a double-pane or impact laminated unit fails, moisture gets between the panes and the window goes cloudy. On a custom shape this can’t be swapped like a stock sash, so we measure the exact radius or angle and order a matched replacement glass pack for the PGT frame.
- Water intrusion at geometric corners and miter joints. Trapezoid, triangular, and pentagon windows have more corners than a rectangle, and every corner is a place water can find. In Sunrise Manor, monsoon-season wind-driven rain hits the east and south faces hard, and we routinely find failed corner sealant on shaped units that face those directions. We re-seal the joints and check the flashing against the wall opening.
- Impact-rated PGT units installed without the right anchor pattern. A shaped impact window is only as good as how it’s fastened into the wall. We’ve opened walls on custom PGT installs and found fasteners spaced tighter or looser than the opening needs. We check the anchor pattern against the opening and correct it, because a well-built unit fastened wrong won’t hold up the way it should.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Custom & Geometric Windows Process
- 1
Diagnostics visit. We look at the unit, the opening, and the wall around it. For shaped and oversized PGT windows we take our own measurements of the radius, angle, and opening depth, because the manufacturer’s original template won’t always match what’s actually in the wall.
- 2
Parts decision, explained to you. Where PGT OEM components are available, we use them. Where they’re not, or where a quality aftermarket part performs as well for less, we tell you both options and the trade-off, in writing. You decide.
- 3
Warranty-safe work. We keep the repair inside what PGT’s warranty allows so you don’t lose coverage on the rest of the unit. If a repair would void your warranty, we say so before we touch anything.
- 4
The repair or install. Our technicians, who have up to 15 years of experience, set the glass pack, hardware, or full replacement unit and check the seal at every edge and corner.
- 5
The test. We operate the window, check the latch and seal, and confirm no light or air gaps remain before we call it done.
- 6
Cleanup and the promise. We leave the opening clean and back the work with the 36500-Day Done Right Promise: if it’s not done right, we make it right.
What PGT Custom & Geometric Windows Costs in Sunrise Manor
Custom and geometric work on PGT units runs higher than standard windows because shaped glass and matching frames are made to order. Typical ranges for Sunrise Manor:
| Job | Typical range |
|---|---|
| Re-seal or re-glaze an arched or radius unit | $250 – $600 |
| Replace hardware on an oversized geometric window | $200 – $500 |
| Replace a fogged shaped insulated glass pack | $450 – $1,200 |
| Full custom shaped impact window, supply and install | $1,200 – $3,500+ per unit |
What moves the number: the shape and size of the opening, whether the glass is impact-rated, whether OEM parts are still available, and how much wall work the opening needs. Straight repairs are at the low end; made-to-order shaped impact units with complex geometry are at the high end. Call (844) 761-9603 for a free written estimate. Estimates are free and there’s no trip charge inside the home county.
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise Manor Homeowners Call Winslow Windows & Doors Sunrise Manor for PGT Work
We’re an independent PGT service provider, not affiliated with or authorized by PGT, and we’re upfront about that. What we bring is a locally owned, owner-operated company with a published address and license number, Ed’s name on the door and on every job. A live person answers every call, 24 hours a day, seven days a week. Every technician is background-checked and arrives in uniform, so you know who’s at your door before the truck pulls up. Our technicians have up to 15 years of experience with shaped and oversized units.
If your PGT window needs a part that’s hard to source, we also install and service CGI, CWS, ES Windows, and ECO Window Systems, so there’s often a matching option when a specific PGT component is delayed. Upfront pricing, no change orders, and the 36500-Day Done Right Promise back all of it. Seniors and veterans always get 10% off.
FAQs
Yes, in most cases. Fogging means the seal between the panes failed, and on a shaped PGT unit we usually replace the insulated glass pack rather than the whole window, matching the original radius or angle. If the frame itself is still true and the hardware works, a repair is often the better call. Call (844) 761-9603 and we’ll tell you honestly whether it’s a repair or a replacement.
Not if it’s done correctly. We keep the work inside what PGT’s warranty allows and only use OEM parts where the warranty requires it. If a repair option would void your coverage, we tell you before we start, and you decide. Call (844) 761-9603 for a free estimate on warranty-safe repair.
Often, yes, but it depends on the series and how long the model has been out of production. Where OEM parts aren’t available, we source quality aftermarket hardware that performs the same, and we explain the trade-off in writing. Call (844) 761-9603 with your model information and we’ll check.
Repair if the frame, glass, and hardware are sound and only one piece failed; replace if the frame is warped, the seal failed on multiple panes, or the opening no longer matches current code. We give you both numbers in a written estimate so you can compare. Call (844) 761-9603 for a free second opinion on any written estimate.
Straight repairs are typically scheduled within a normal service window, while made-to-order shaped and impact units run several weeks because the glass and matching frame are built to your measurements. We tell you the real timeline in your estimate, not a guess. Call (844) 761-9603 to get started.
Get Your Free PGT Estimate in Sunrise Manor
Whether your arched PGT window is leaking, your oversized opening won’t latch square, or you’re planning a fresh custom geometric install, we’ll give you a written, line-item estimate with no surprises on the invoice. A live person answers (844) 761-9603 any hour, any day. Seniors and veterans save 10%, and we’ll match a second opinion on any written estimate for free. The one down the road is a neighbor you can call at 2 a.m. and someone will actually answer.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.