Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Sliding & Patio Doors: The Sunrise Manor Owner’s Guide
We install and service Mr-Glass sliding and patio doors throughout Sunrise Manor, and a full door replacement with a sliding glass unit typically runs $1,900 to $5,200 depending on size, glass package and frame, while a single failed component on an existing Mr-Glass door often runs $180 to $650. Most Sunrise Manor owners don’t notice a part is going until a door starts dragging on the track, the lock won’t line up, or a 110-degree August afternoon pushes heat past a glass package that used to hold. By then the door has usually been failing quietly for a season or two. Our technicians have up to 15 years of experience with sliding systems, and we’re an independent service provider, not affiliated with Mr-Glass.

Which Mr-Glass Models This Applies To
Mr-Glass builds to Florida product-approval standards, and the sliding series we see most in Sunrise Manor use standard 3-inch and 4-inch frame depths with interlock stiles built around specific roller and latch profiles. The gotcha that trips people up: two doors that look identical from the living room can use different roller assemblies, because Mr-Glass changed stile extrusions across production runs. An aftermarket roller sold as “universal” can physically fit the track but sit the panel a quarter-inch low, which throws off the jamb and lock every time the door closes.
Start by finding the label – Mr-Glass puts a model and serial sticker in the top jamb channel or on the frame head, and on some series it sits behind the screen track where it’s easy to miss. Measure the panel width, panel height, glass thickness and track depth before you call anyone. For most Sunrise Manor owners the OEM-versus-aftermarket call comes down to the roller and lock: OEM gives you an exact match and a known service life, quality aftermarket is fine for rollers, tracks and weather stripping when the profile is verified against your serial. Hinges, glass units and modern multi-point hardware are where we steer owners back to OEM. We also service sliding and patio door systems on PGT, CGI and CWS units, so if your home has a mix of products, one visit can cover all of them.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Mr-Glass Sliding & Patio Doors Is Failing
- The panel drags or grinds on the track. Collapsed steel or nylon rollers flatten under the panel’s weight, which in Sunrise Manor homes is worsened by grit that collects in the track through dust season. Once a roller spindle seizes, it grinds the aluminum track and that damage is permanent.
- The door won’t lock or the lock won’t line up with the keeper. A panel that has dropped on worn rollers pulls the lock out of alignment. Force it and the mortise lock body or the jamb keeper bends, turning a $40 part into a $200 repair.
- Daylight around the frame or a draft you didn’t have last year. Seals, sweep and weather stripping compress and crack faster in Nevada’s dry heat than in mild climates. That gap is where cooling dollars go.
- Glass is warm to the touch or the room feels hotter than it used to. A failed seal in a dual-pane unit causes fogging and kills the insulating value. Sliding glass with west or south exposure in Sunrise Manor takes a real beating from afternoon sun.
- The screen won’t track, or the screen frame is bent. Bent screen frames and worn screen rollers are common after years of family use, and a screen that won’t seat properly lets insects past the very barrier it was meant to hold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest range for work in Sunrise Manor. Roller replacement runs $180 to $320 per door panel. Track replacement or track repair runs $220 to $480. Lock and handle hardware runs $150 to $350 depending on whether the mortise body has to be swapped. Glass unit replacement on a dual-pane door runs $380 to $850 based on size and glass package. Full door replacement with a new sliding unit runs $1,900 to $5,200 installed.
What drives the range: panel size and weight, glass package (standard, low-E, impact-rated), frame material, and whether the opening, framing or threshold needs repair before the new door goes in. Every quote we write is line-item and upfront – the parts number and labor number are separate and stay put. No change orders mid-job. The work carries our 36500-Day Done Right Promise: if the install isn’t right, we come back and make it right. Call (844) 761-9603 for a free estimate – we answer every call with a live person, 24 hours a day.
DIY or Call Us?
You can safely do some things yourself. Wipe the track clean, vacuum grit, check that the panel sits flat on the track with a bubble level, and look for debris under the roller. If the panel slides freely but the lock doesn’t catch, and the panel height measures even on both ends of the track, the lock is likely the culprit – and you may just need the hardware. That much is good information to have before a technician arrives.
Where DIY goes wrong: pulling a sliding panel out. A large patio door panel on a 6-foot opening can weigh well over 100 pounds, and if the rollers are still engaged when you lift, the panel can come down sideways. Sliding door panels are also the biggest piece of glass in most Sunrise Manor homes – dropping one is dangerous to you and expensive to replace. If the panel grinds, won’t lift out cleanly, or the glass unit is fogged, that’s where we take over. Call (844) 761-9603 and we’ll look at it.
FAQs
Rollers typically last 8 to 12 years in this climate, weather stripping and seals more like 5 to 8 because the desert heat bakes them faster than in coastal markets. Glass seals can fail earlier on west-facing doors that take the full afternoon sun. If your door is past the 10-year mark and starts to drag, the rollers are the first place we look. Call (844) 761-9603 for an exact quote – estimates are free.
Usually yes. Rollers, tracks, locks, handles, weather stripping and screen assemblies are all serviceable on most Mr-Glass sliding series, and repair typically costs a fraction of a new door. Full replacement makes sense when the glass unit has failed and the frame is compromised, or when the opening itself needs work. We tell you which side of that line you’re on with an honest picture of what needs fixing. Call (844) 761-9603 to schedule a free second opinion on any written estimate.
Most single-part repairs – rollers, locks, sweeps – are done in about 1 to 2 hours in the home, and full door replacement is a half-day to full-day job once the unit is on site. We confirm the onsite window when you schedule, so you’re not waiting around for a crew that shows up at an hour nobody agreed to. Call (844) 761-9603 to set a time.
We match it to your door by model and serial number off the jamb label plus the measurements you give us, then verify the part against the stile and track profile before ordering. If your label is missing or worn off, we measure on site and cross-reference the hardware. We don’t stock parts or carry them on a truck – every part is sourced to your specific door. Call (844) 761-9603 and we’ll walk you through what we need to get it right.
If you’re in Sunrise Manor and your Mr-Glass sliding door is dragging, won’t lock, or the glass has gone foggy, the fix is usually smaller than you fear and faster than you expect. Winslow Windows & Doors is the one down the road, and Ed’s name is on every job we do. Call (844) 761-9603 for a free estimate – a live person answers any hour, and we’ll tell you exactly what needs replacing, what it costs, and what we’d do if it were our own door.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.