Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Sliding & Patio Doors: The Sunrise Manor Owner’s Guide
We install, repair, and replace ES Windows sliding glass and patio doors across Sunrise Manor, with most full door replacements landing between $2,100 and $4,800 installed depending on size, glass package, and frame condition. Roller, track, and hardware repairs typically run $180 to $420. If your ES Windows door is dragging, leaking, fogging, or refusing to latch, we can usually diagnose it in a single visit and tell you honestly whether a repair or a full swap is the smarter spend.

Most Sunrise Manor homeowners find us the same way: the door starts grinding on the track in July, or water shows up on the interior sill after a monsoon, and suddenly the thing that used to glide needs a shoulder to close. That pattern is real, and it’s predictable in this climate.
Which ES Windows Models This Applies To
ES Windows built sliding and patio doors across several product lines, and the part you need depends on the series, the panel size, and the year of manufacture, all of which live on a label inside the door jamb or on the top or bottom rail of the sliding panel. Pull that label before you order anything. A model number gets you the right roller or weatherstrip the first time; a photo of the door and a tape measure get you a coin flip.
The gotcha we run into constantly in Sunrise Manor: ES Windows door rollers changed track profiles between production runs, and a replacement roller that fits one generation of track will bind or jump out of a later one. The tell is the track’s cross-section. A rounded track wants a different wheel than a squared channel, and measuring the old roller’s diameter and axle length matters more than the model number alone.
OEM versus aftermarket is a genuine decision, not a sales line. OEM ES Windows parts match spec exactly and hold up the longest, but lead times stretch when a specific component is backordered. A quality aftermarket equivalent gets you a stainless steel roller or a compatible weatherstrip now, at a lower price, and performs well in most Sunrise Manor applications if the specs are matched correctly. We’re an independent service provider and not affiliated with ES Windows, so we’ll tell you plainly when the OEM part is worth the wait and when it isn’t. The other brands in our lineup, PGT, CGI, and CWS, use different profiles, so never assume a part crosses over.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your ES Windows Sliding & Patio Doors Is Failing
- The door drags or needs a lift to close. That’s a worn roller or a flattened wheel, usually paired with grit packed into the lower track. In Sunrise Manor, windblown dust accelerates this faster than most owners expect.
- Water stains on the interior sill after rain. The weatherstrip or the weep system has failed, and monsoon-driven rain finds the gap every time. Left alone, it migrates into the frame and drywall.
- Fog or condensation between the glass panes. The sealed unit’s spacer has failed and the inert gas is gone. This one is not a hardware fix: the insulated glass unit gets replaced or the door does.
- The latch won’t catch or the door won’t lock squarely. Usually a shifted panel on worn rollers or a striker that’s drifted out of alignment. A door that won’t lock is a security problem, not just an annoyance.
- Visible gaps, sagging, or a warped frame. Frame movement or a failed corner joint, often from heat cycling in a west-facing wall. This is where repair gets expensive and replacement usually wins on cost.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Sunrise Manor homeowners should expect, quoted upfront with no surprise line items on the invoice:
| Work | Typical Installed Range |
|---|---|
| Roller replacement (per panel) | $180 – $280 |
| Track repair or resurfacing | $220 – $380 |
| Weatherstrip / seal replacement | $200 – $420 |
| Insulated glass unit replacement | $450 – $850 |
| Full sliding / patio door replacement | $2,100 – $4,800 |
The range comes down to panel size, glass package (standard versus low-E versus impact-rated), frame material, and whether the rough opening needs any correction. We give you a written line-item quote that separates parts from labor, so you can see exactly what you’re paying for. Every job carries our 36500-Day Done Right Promise: if it’s not done right, we make it right, period.

DIY or Call Us?
Some of this is safe to handle yourself. Cleaning the lower track, vacuuming out grit, and lubricating rollers with a silicone spray are all fine and can buy you months. Checking the latch alignment and taking photos of the door label are useful too.
Where DIY goes wrong: pulling a sliding panel out of its track on a second-story or elevated opening, trying to re-set a heavy impact-rated panel alone, or prying at a frame that’s already shifted. A falling glass panel is a serious injury risk, and a misaligned frame can turn a $300 repair into a $4,000 replacement. If the door won’t glide with light pressure or the frame is moving, stop and let us look at it. We’re background-checked, uniformed, and we don’t charge a trip fee inside the home county. Call (844) 761-9603 and we’ll tell you straight whether you need a part or a whole door.
FAQs
How long do ES Windows sliding and patio doors last in Sunrise Manor? Expect 15 to 25 years for the door itself, but rollers and weatherstrip wear on a shorter cycle, typically 8 to 12 years here because of heat and dust. Glass seals often fail sooner on west- and south-facing walls.
Can it be repaired instead of replaced? Yes, often. A door that drags, leaks, or won’t latch can frequently be fixed with new rollers, weatherstrip, or a glass unit, usually for a fraction of a full replacement. We’ll tell you when repair stops making financial sense.
How long does the swap take? A roller or weatherstrip job is typically done in a single visit of one to two hours. A full door replacement usually takes half a day to a full day depending on the opening and glass package.
How do you source the part? We identify your exact ES Windows model from the door label, match the specs, and order OEM or a quality aftermarket equivalent based on availability and lead time. Call (844) 761-9603 for a free estimate and we’ll walk you through the options.
When your ES Windows patio door starts fighting you, you want a local company that answers the phone at 2 a.m. and stands behind the work. Winslow Windows & Doors Sunrise Manor is the one down the road: locally owned, licensed, with upfront pricing and no surprises. Call (844) 761-9603 to schedule your free estimate.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.