Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Sliding Glass & Patio Doors in Sunrise Manor: What to Know First
We provide independent ES Windows sliding glass and patio door service in Sunrise Manor, NV. Most single-panel repairs (rollers, tracks, weatherstripping, glass replacement) take one visit; full door replacements typically run two to four weeks from measure to install because the ES door has to be ordered to your rough opening. Pricing is quoted upfront in writing with no change orders once work starts.

This page is for Sunrise Manor homeowners who already own ES Windows products and want them serviced or replaced correctly, by people who work on the brand regularly. We’re an independent ES Windows service provider, not the manufacturer. Call (844) 761-9603 for a free estimate.
How ES Windows Products Fail – and How We Fix Them
ES Windows builds for South Florida impact codes, and those same doors show up all over Sunrise Manor: in the 89031 and 89115 subdivisions off Lamb and Nellis, in the older ranch homes near Desert Pines, and in the mid-2000s builds where a builder standardized on ES sliders. The failure patterns are specific to how ES engineers them. Here’s what we see most.
- Roller fatigue on the ES Series 500 and similar heavy impact sliders. These are 200-plus lb impact-rated panels rolling on steel tandem rollers. In Sunrise Manor where summer temps push past 110°F, the nylon wheel face hardens and flat-spots, and the panel starts dragging or hopping in the track. We replace with OEM-spec hardened tandem rollers, not the $4 hardware-store singles that fail again inside a year.
- Track buildup and pitting from desert dust and monsoon grit. Sunrise Manor sits downwind of open desert, and the fine caliche dust that settles into the lower track acts like sandpaper on the roller and the extrusion. An ES door that gets blown out twice a year and never cleaned will develop a worn, notched track. We clean, re-anodize or replace the track section, and set the panel so it rides in fresh aluminum instead of the worn groove.
- Weatherstrip shrinkage and corner separation. The polypropylene pile in ES door frames shrinks in low-humidity heat, pulling away at the bottom corners where the dust comes in. That’s the grit you feel on the sill. We re-seat with OEM-profile weatherstrip; aftermarket pile of the wrong thickness either binds the panel or leaves the gap again.
- Glass seal failure and fogged insulated units. ES impact doors use laminated or insulated glass, and a failed perimeter seal shows up as fog or a wavy haze between the panes. That’s a factory-unit replacement, not a spot fix, and we measure the exact ES glazing channel before ordering so the new unit seats without shims or silicone caulk covering a wrong fit.
- Screen and mesh damage from wind-blown debris. The bug screens on ES sliders take a beating in Sunrise Manor’s spring wind events, and a torn screen lets dust straight into the track. We re-screen with the correct spline size for the ES frame profile, which is a small detail most generic handymen get wrong.
We also service PGT, CGI, CWS, and ECO Window Systems sliding door products when they come up, but ES is a door we know specifically and keep the right parts for.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our ES Windows Sliding Glass & Patio Doors Process
Every ES job follows the same path, because skipping steps is where sliders come back. Here’s what happens from your first call.
- 1
Diagnostic visit. A background-checked, uniformed technician measures the panel, checks the track for true and level, tests the lock and latch, and photographs the failure so you see what we see.
- 2
Parts decision in writing. We tell you whether the fix needs an OEM ES part, a quality aftermarket equivalent, or a factory glass unit, and what each costs. You approve before we order.
- 3
Warranty check. If the ES product is still under manufacturer coverage for a defect, we tell you – and we don’t cut into a warranted assembly in a way that voids it. We’d rather refer the claim than do work that costs you the warranty.
- 4
The repair or replacement. Rollers, track, weatherstrip, glass, or full door set, done with the correct ES frame profile and hardware.
- 5
The test. Panel rolls square and smooth by hand, locks engage cleanly, no daylight at the seal, screen seated and taut.
- 6
Cleanup and the guarantee. Site swept, old parts hauled off, and the work backed by the 36500-Day Done Right Promise: if it’s not done right, we make it right.
What ES Windows Sliding Glass & Patio Doors Costs in Sunrise Manor
These are real ranges. Sunrise Manor pricing is driven by the panel weight of ES impact doors, parts availability, and whether the track is true. Your written estimate confirms the exact number.
- Roller replacement (OEM-spec tandem): $180 – $320 per panel
- Track cleaning, repair, or section replacement: $220 – $450
- Weatherstrip re-seat and re-seal: $150 – $300
- Insulated glass unit replacement: $320 – $680
- Full ES sliding patio door replacement (impact-rated): $1,800 – $4,200
What moves the number: panel weight, whether the ES frame profile needs custom-order parts, and if the rough opening has shifted. Upfront pricing, no surprises on the invoice. Call (844) 761-9603 to schedule a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise Manor Homeowners Call Winslow Windows & Doors Sunrise Manor for ES Windows Work
Ed’s name is on the door, and on every job we do. We’re locally owned and owner-operated, and we’ve been doing this since 2011 with a published address and license number. When you call, a live person answers, 24 hours a day – no voicemail loop, no call center. Our technicians are background-checked and arrive in uniform, and they have up to 15 years of experience working on ES products specifically. If we’re looking at a door that needs an OEM part, we say so; if an aftermarket equivalent is genuinely fine, we tell you that and why. Our standing offers are permanent: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside our home county, and 10% off for seniors and veterans. And because we’re an authorized installer for eight brands including PGT, CGI, CWS, and ECO Window Systems, we’ve got the brand knowledge to back up the ES work. The one down the road.
FAQs
Does servicing my ES sliding door void the manufacturer warranty? No, as long as the work uses the correct ES parts and the frame isn’t cut into. We check warranty status before we touch the door and tell you if a defect should go to the manufacturer first. Call (844) 761-9603 for a free estimate and a warranty check.
Can you get OEM ES Windows parts, or do you use aftermarket? We use OEM-spec parts for rollers, weatherstrip, and glass units, and where an aftermarket equivalent actually performs better (a few roller grades), we offer it and explain the trade-off in writing. Call (844) 761-9603 for a free estimate.
Should I repair or replace my ES sliding door? Repair the hardware, track, or glass if the frame is sound and the door is under warranty; replace the whole unit if the frame is corroded, the rough opening has shifted, or parts are discontinued. We quote both so you can decide. Call (844) 761-9603.
How fast can you service my ES door in Sunrise Manor? Hardware repairs and re-seals typically happen on the first visit. Glass units and full doors are ordered to the ES spec and run two to four weeks. Call (844) 761-9603 for a free estimate.
Do you work on other brands of sliding doors too? Yes. Beyond ES, we work on PGT, CGI, CWS, and ECO Window Systems doors. Call (844) 761-9603 for a free estimate.
Call Winslow Windows & Doors Sunrise Manor for Your ES Door
If your ES Windows sliding glass or patio door is dragging, fogging, or leaking dust, call (844) 761-9603 for a free estimate. A live person answers any hour, every day. Ed’s name is on the door, and on every job we do in Sunrise Manor.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.