Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Window Replacement: The Sunrise Manor Owner’s Guide
CGI window replacement in Sunrise Manor typically runs $420 – $1,150 per opening installed, depending on the series and glass package, and most swaps are scheduled within a few days of your free estimate. We’re an independent installer, not affiliated with CGI, and we work with the full line of CGI-compatible units and hardware.

Owners usually find out a CGI window has failed the same way: a foggy pane that won’t clear, a sash that drags or won’t latch, or a surprise on the power bill in July. Sunrise Manor sits in the low desert, where summer highs push past 110°F and the sun hammers west-facing glass for hours. That swing from furnace afternoons to cool nights works seals and weatherstripping hard, and it’s why we see failed glazing and tired hardware here more than in milder climates. If you’ve noticed one of those symptoms, you’re in the right place to price the fix honestly.
Which CGI Models This Applies To
CGI manufactures several residential lines, and the right replacement depends on which series you actually have. The most common in Sunrise Manor homes are CGI’s single-hung, horizontal slider, and fixed-picture units, plus their impact-rated series built for windborne-debris zones. The starting point is the manufacturer label: it’s usually on the top or side of the sash frame or tucked in the head jamb, and it carries the series name, unit size, and glass code. Photograph it before you do anything else. If the label is painted over or gone, we measure the rough opening and glass dimensions and match them to CGI’s spec sheet.
Here’s the compatibility gotcha that trips people up: CGI’s impact-rated frames use a heavier extrusion and different glazing bead than the standard series, so a standard-series sash won’t seat correctly in an impact frame even when the opening dimensions match. Get the series right or the swap won’t seal. On the OEM-versus-aftermarket question, CGI factory parts are the safest fit for warranty and exact color match. Quality aftermarket equivalents are a solid option for hardware like balances, locks, and rollers when the original is discontinued, and they typically cost 20 – 35% less. For the glass unit itself, we source to CGI’s published spec so performance matches the rest of the house. Sunrise Manor homes built in the 2000s boom often mix series across the elevation, so we check each opening rather than assuming.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Window Replacement Is Failing
CGI windows age predictably in desert heat, and the failure usually shows up in one of five ways:
- Fogging or condensation between the panes. The insulated glass seal has broken, letting moisture into the argon gap. Once it fogs, the unit won’t clear and the insulating value is gone.
- A sash that drags, sticks, or won’t latch. Usually a worn balance or a frame that’s shifted with thermal movement. A sash that won’t lock is also a security gap, not just an annoyance.
- Drafts or hot spots around the frame. Failed weatherstripping or a perimeter seal that’s cracked in the sun. You’ll feel it most on west- and south-facing windows in the afternoon.
- Water staining or softness at the sill. A failed seal or blocked weep holes letting water sit. In Sunrise Manor’s occasional monsoon downpours, that trapped water finds the framing fast.
- Rising cooling bills with no other cause. Degraded glass or a broken seal lets heat load climb. Compare the same months year over year before you blame the AC.
Two of those symptoms, fogging and draftiness, are the ones that most often mean the whole unit, not a part, needs replacing. The others can sometimes be fixed with hardware alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed CGI window replacement in Sunrise Manor generally falls in these ranges:
| Scope | Typical installed range |
|---|---|
| Standard single-hung, single opening | $420 – $650 |
| Horizontal slider, single opening | $520 – $780 |
| Fixed picture window | $450 – $700 |
| Impact-rated series | $750 – $1,150 |
| Hardware-only repair (balance, lock, roller) | $145 – $320 |
What drives the spread: the series, glass package (low-E, impact, or standard), opening size, and whether the frame is sound enough to reuse. We give you a written line-item quote that separates the unit from the labor, so you can see exactly what you’re paying for. No change orders once work starts. Every install is backed by our 36500-Day Done Right Promise: if it’s not done right, we make it right, period. We also pull the permits and pass the inspections the job requires.

DIY or Call Us?
Some things you can safely check yourself. Look for the label and write down the series and size. Clean the weep holes at the sill. Test every lock and latch. Feel for drafts on a hot afternoon with the AC running. That tells you whether you’re dealing with a part or a whole unit.
What you shouldn’t tackle alone is the glass swap itself. Replacing an insulated glass unit or a full window means handling heavy, fragile glass, working at height, and getting the perimeter seal right so it doesn’t leak in the next monsoon. A bad seal means water intrusion and a redo. We send background-checked, uniformed technicians who arrive with the right parts and the right tools, and we handle the disposal. Our technicians have up to 15 years of experience on windows just like yours. Call (844) 761-9603 for a free estimate and let’s get your CGI windows sorted.
FAQs
Expect 20 – 25 years for the frame and 10 – 15 years for the insulated glass seal in this climate. Sunrise Manor’s heat and intense UV shorten glass-seal life compared to milder areas, so fogging often appears before the frame shows any wear. If you’re past the 12-year mark on the glass and seeing condensation, call (844) 761-9603 for a free assessment.
Often yes, if only the hardware failed. A worn balance, lock, or roller is a straightforward repair starting around $145. But a fogged or broken glass seal means the insulated unit needs replacing, and a soft or water-damaged frame means the whole window comes out. We’ll tell you which one you’re facing on the estimate, with no pressure either way.
A single opening usually takes two to three hours; hardware-only repairs run under an hour. Most Sunrise Manor jobs are completed in one visit, and units are scheduled a few days out rather than same-day. Multi-window jobs we’ll lay out clearly on the quote so you know the full timeline before we start.
We match to your CGI series and glass code, then source either the factory part or a quality aftermarket equivalent, depending on availability and fit. We don’t carry stock on a truck; the exact part is ordered to your unit’s specs so it seats and seals correctly. You’ll see the sourcing on the line-item quote before any work begins.
We also service PGT, CWS, and ES Windows if your home has a mix of brands.
CGI parts don’t wait, and neither should you. Call Winslow Windows & Doors Sunrise Manor at (844) 761-9603 for a free estimate. Upfront pricing, a live person on every call, 24 hours a day, and Ed’s name on the door and on every job we do. We’re the one down the road.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.