Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Custom & Geometric Windows in Sunrise Manor: What to Know First
We install and service CGI custom and geometric windows in Sunrise Manor as an independent CGI service provider, and most custom-shaped and arched units are measured within a week and installed in one scheduled day once the factory build arrives. Custom impact and geometric work here usually runs $3,900 to $14,000 per opening depending on size, shape and glass package. We won’t quote a made-up number over the phone: call (844) 761-9603 and a live person answers any hour, then we send a written, line-item estimate you can compare.

This page is for Sunrise Manor homeowners who already have a CGI window in the wall – or who want a CGI-shaped unit matched to a wall that isn’t a plain rectangle. Arches, half-rounds, trapezoids, eyebrow windows, corner glass and oversized sliding walls all show up in Sunrise Manor homes, and each one puts different stress on a frame than a standard punched window ever will.
Key Takeaways
- CGI builds custom-shape and impact units to order, so the measurement has to be right the first time – we template shapes before we submit.
- Most CGI service and replacement calls in Sunrise Manor come down to four things: glass seal failure, frame movement, hardware wear, and installer error on the original set.
- We work on CGI alongside PGT, CWS, ES Windows and ECO Window Systems, so we aren’t pushing one brand’s parts at you.
- Every job carries the 36500-Day Done Right Promise: if it’s not done right, we make it right.
How CGI Products Fail – and How We Fix Them
CGI units are built well, and most of the failures we see in Sunrise Manor are installation or age issues, not a bad product. Here’s what actually breaks, and what we do about it.
- Seal failure and hazing on sealed impact glass units. CGI’s laminated and insulated impact glass builds a permanent haze, cloudiness or a wavy “snake” pattern between the panes when the perimeter seal fails. On custom shapes this happens faster than on rectangles because curved and angled edges carry more seal length per square foot of glass. We confirm seal failure by checking for a fogged band along the frame before we ever quote a replacement – and on shaped units we price the glass separately from the sash so you aren’t paying for a whole window when only the glass unit has failed.
- Frame and sash racking on arches and half-rounds. Curved-head units are built from bent profiles, and if a builder nailed them off out of square or skipped shims on the curved springline, the sash drags and the weatherstripping separates within a few years. Sunrise Manor’s summer heat expands those bent vinyl and aluminum profiles more than a straight frame, so the drag gets worse in July. Our fix is to re-square and re-shim the unit in the opening, replace the weatherseal, and re-check the sash gap before we lubricate or replace hardware.
- Water intrusion at geometric corner joints. Trapezoid, octagon and corner units have more mitered joints than a rectangle, and each joint is a place for caulk to crack. In a west-facing wall here, miter joints take the full afternoon sun. We cut out failed sealant, reseal the joint properly, and recheck flashing above the head – skipping the flashing step is how the same leak returns after the next monsoon.
- Hardware and operator wear on awning and casement shapes. A crank operator on a taller awning unit works harder than one on a standard window, and the gear mechanism and hinge arms wear out first. We match a replacement operator to the correct CGI sash series and confirm it’s compatible before install, rather than forcing a generic operator that leaves the sash out of alignment.
- Oversized openings that were never engineered. Big fixed, sliding, or stacked multi-panel openings in a remodelled room sometimes got installed without accounting for wind load or the header above. We check the opening and the wall before we sell a replacement, and we tell you if the correct fix is a structural one we should flag for a licensed contractor – better to know that before the unit ships than after.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Custom & Geometric Windows Process
Here’s what a real CGI job looks like, start to finish:
- 1
Call and intake. A live person answers, any hour. We take your address, the room, the shape of the unit, and a photo if you can text one. No voicemail loop, no next-day callback.
- 2
In-home diagnostic. A background-checked, uniformed technician measures the opening, checks the glass seal, tests the sash and hardware, and inspects the flashing and the wall above. For a custom shape we template the opening rather than trusting a tape measure, because arcing and angled openings rarely match their nominal size.
- 3
Written estimate and parts decision. You get a line-item written quote. On repairs, we tell you whether a CGI-compatible OEM part or a quality aftermarket equivalent is the better call – and why. We don’t upsell a new window when a seal, shim, or operator fixes it.
- 4
Order and lead time. Custom-shape and impact units are built to spec, so expect a factory lead time before install day. We give you the window in writing.
- 5
Install and test. We set the unit level and square, shim it properly, seal and flash it, then operate it and check the sash gap, hardware, and drainage before we leave.
- 6
Cleanup and walkthrough. We haul away old materials, walk you through the finished work, and back it with the 36500-Day Done Right Promise.
What CGI Custom & Geometric Windows Costs in Sunrise Manor
These are the real ranges we see for CGI work in Sunrise Manor. Your exact price depends on size, shape, glass package, and how much the opening fights us.
| Job | Typical range |
|---|---|
| Single seal or glass-unit replacement (standard shape) | $420 – $1,100 |
| Geometric or arched glass-unit replacement | $900 – $2,400 |
| Hardware / operator replacement | $180 – $450 |
| Reseal, re-shim, or water-intrusion repair | $250 – $850 |
| Custom impact geometric window (new or full replacement, installed) | $3,900 – $14,000 per opening |
What moves the price: the shape (arches and trapezoids cost more than rectangles), the glass package, the size of an oversized opening, and whether the original install needs correcting before the new unit goes in. We give a written, line-item estimate, and the price on the quote is the price on the invoice – no surprise change orders. Call (844) 761-9603 for your free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise Manor Homeowners Call Winslow Windows & Doors Sunrise Manor for CGI Work
A live person answers every call, 24 hours a day, seven days a week. When a technician shows up, they’re background-checked and in uniform, so you know exactly who’s at your door before the truck pulls up. Our technicians have up to 15 years of experience on shaped glass, impact glass, and hard-to-fit openings.

We’re locally owned and owner-operated, with a published address and license number, and we install and service eight premium brands – CGI alongside PGT, CWS, ES Windows, ECO Window Systems and others – so we’re not steering you toward one label. Standing offers are permanent, not limited-time: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside our home county, and 10% off for seniors and veterans. And it all comes under the 36500-Day Done Right Promise. That’s the difference between the one down the road and a call center you’ll never reach again.
FAQs
CGI’s manufacturer warranty covers the product itself, but most failures we see are installation issues, which the factory warranty won’t cover – that’s worth checking your paperwork on. We’ll review your documents and tell you honestly what’s covered and what isn’t, as an independent CGI service provider. Call (844) 761-9603 for a free second opinion on any written estimate.
Often yes – if the frame and sash are sound, a glass-unit swap on a shaped CGI window is far cheaper than a full replacement. We only recommend a full unit replacement when the frame is racked, rotted, or the opening needs correcting. Call (844) 761-9603 and we’ll tell you which you actually need.
Custom geometric and impact units are built to spec, so expect a factory lead time before install day – we give you the exact window in writing on your estimate. Standard-shape repairs are usually faster because the glass can often be sourced sooner. Call (844) 761-9603 for a current lead-time estimate.
We use CGI-compatible OEM parts when they’re the right call and a quality aftermarket equivalent when it isn’t, and we explain the trade-off before we order. We don’t force a generic part that leaves a shaped sash out of alignment. Call (844) 761-9603 to talk through your options.
Yes – we measure and template the shape and match finish, frame profile, and glass configuration so a new CGI unit reads as original to the home. That matters most on arches and corner units where a mismatched frame is obvious from the street. Call (844) 761-9603 to schedule your free estimate.
Get Your Free CGI Custom & Geometric Windows Estimate in Sunrise Manor
CGI custom and geometric windows take a different approach than a standard replacement – the shape has to be templated, the glass package matched, and the install done right the first time. We’ll give you a written, line-item estimate, answer every question, and back the work with the 36500-Day Done Right Promise. Call (844) 761-9603 for your free estimate – a live person answers any hour, seven days a week. Ed’s name is on the door, and on every job we do.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.