Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateECO Window Systems Sliding & Patio Doors: The Sunrise Manor Owner’s Guide
We install and replace ECO Window Systems-compatible sliding and patio doors for Sunrise Manor homeowners, and fully installed pricing typically lands between $1,650 and $4,800 per opening depending on size, glass package, and track configuration. Sliding panel replacement and hardware-only work often runs far less than a full unit. Most Sunrise Manor owners discover the problem the same way: a door that suddenly needs two hands to slide, a panel that drags on the sill in summer, or a latch that won’t catch when the wind kicks up off the valley floor. Once a track is worn or a roller has failed, adjusting the door rarely holds, and that’s usually the week someone dials us.

Key Takeaways
- Installed ECO Window Systems sliding or patio door replacement in Sunrise Manor typically runs $1,650 to $4,800 per opening.
- The rollers, tracks, and weather seals are what fail first in southern Nevada’s heat and dust, not usually the glass.
- Measurements come from the unit label, not the rough opening on your wall.
- We’re an independent service provider, not affiliated with ECO Window Systems.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds its sliding and patio door lines in a few families – standard two-panel sliders, three- and four-panel configurations, and larger multi-slide units for great rooms. Each family uses a different roller carriage and track profile, so a roller that fits a two-panel slider often won’t sit correctly in a three-panel assembly. The first thing we do on any Sunrise Manor job is find the manufacturer label, usually on the top or side of the sliding panel or molded into the master frame. That label carries the model and serial number, and it’s how we cross-reference the exact part.
If the label is missing or sun-bleached, we measure the panel width, panel height, and track depth ourselves and match those dimensions to the current ECO Window Systems part catalog. This is where the OEM-versus-aftermarket decision matters. Genuine ECO Window Systems parts come with the exact fit, but for high-wear components like rollers and weather seals, a quality aftermarket equivalent often outlasts the original at a lower cost. We tell Sunrise Manor homeowners which is which before we order anything, so there are no surprises on the invoice.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your ECO Window Systems Sliding & Patio Doors Is Failing
- The door drags or needs to be lifted to slide. A worn or seized roller is the usual cause. When the roller stops turning, the panel grinds the track instead of rolling on it, and both parts wear faster from there.
- You can see daylight or feel a draft around the edges. The weather seal or pile strip has flattened out. In Sunrise Manor’s summer heat, seals compress and crack faster than in cooler climates, and once they lose their spring, air and dust leak straight through.
- The latch, handle, or lock won’t line up or catch. The door has shifted on its track, or the latch hardware is worn. On an exterior slider, a lock that won’t engage is a security problem, and it’s one we’d want to look at quickly.
- The track is pitted, rusted, or packed with grit. Southern Nevada’s wind-blown dust and grit settle into tracks and grind the rollers down. Once the track surface is damaged, even new rollers wear out quickly.
- The glass is fogged between the panes. The sealed glass unit has failed and moisture has worked its way in. That’s a glass replacement rather than an adjustment, and it’s the one symptom where the whole unit gets swapped.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed ECO Window Systems sliding and patio door work in Sunrise Manor runs from roughly $1,650 for a standard two-panel slider up to $4,800 or more for a large multi-slide unit with upgraded glass. What drives the range is panel count, opening width, glass package, and whether the frame and track are being replaced or the existing frame stays. A roller-and-track service is far less than a full unit swap; a sealed-glass-unit replacement sits in between.
Every quote is line-itemed, so you see the part cost and the labor cost separately. No change orders, no surprise additions once the door is off the track. Our work carries the 36500-Day Done Right Promise – if it isn’t done right, we make it right. We’re an independent service provider and not affiliated with ECO Window Systems, so our promise is our own. Call (844) 761-9603 to schedule your free estimate.
DIY or Call Us?
Some things you can safely check on your own. Clean the track with a stiff brush and a vacuum to see if grit is the only problem. Wipe the rollers clean to confirm they still turn. Tighten visible adjustment screws on the roller carriage and see if the panel slides more smoothly. All of that is gentle and reversible.
What we don’t recommend is prying out a stuck panel or forcing a roller carriage on a door that could come off the track. A sliding glass panel is heavy, and a panel that drops or swings free is dangerous – that’s the point where a trained technician should take over. We also see homeowners try to fix a misaligned latch when the real issue is a sagging track, and that just delays a proper repair. When it’s beyond a cleaning and a screwdriver, call us at (844) 761-9603 – estimates are free.
FAQs
Rollers typically last five to ten years in southern Nevada, sometimes less if the track sees heavy dust. The combination of summer heat and wind-blown grit is hard on moving parts, so a roller that fails at year six or seven is normal here, not a defect. Call (844) 761-9603 for an exact quote on a replacement – estimates are free.
Often yes. A worn roller, a damaged track section, or a broken latch is usually a component repair rather than a full replacement, and it’s the more economical path when the frame and glass are still sound. Fogged glass between the panes is the exception – that’s a sealed unit replacement. Call (844) 761-9603 and we’ll tell you honestly which one you’re looking at.
A roller or track service is typically a few hours on site; a full unit replacement is usually a scheduled day job once the part is in hand. Timing depends on whether the part is a standard catalog item or needs to be ordered to your panel dimensions. Call (844) 761-9603 to get a realistic window for your Sunrise Manor door.
We start with the unit label on your panel, and if that’s gone we measure panel and track dimensions to match the current ECO Window Systems catalog. We also work with PGT, CGI, and CWS parts, so if your home mixes brands, we can handle it in one visit. Call (844) 761-9603 to schedule your free estimate.
When your sliding or patio door starts fighting you, the fix is usually a part – not a whole new door – and getting it matched right is the difference between a smooth glide and a repeat repair. Winslow Windows & Doors Sunrise Manor is the local company down the road, with background-checked technicians, upfront pricing, and a live person answering the phone around the clock. Call (844) 761-9603 to schedule your free estimate.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.