Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateECO Window Systems Custom & Geometric Windows in Sunrise Manor: What to Know First
Custom and geometric windows in ECO Window Systems profiles are a specialty job, not a stock swap. In Sunrise Manor, most custom ECO Window Systems orders – arched units, radius-top windows, angled bays, oversized picture openings – run four to eight weeks from field measure to final inspection, and honest pricing falls roughly between $1,100 and $4,500 per opening depending on size, glass package, and frame geometry. We quote written line-item estimates, free, and we don’t change the number once the job starts.

This page is for Sunrise Manor homeowners whose homes already have ECO Window Systems product on the walls – or who want custom geometry in that product line and need it done once, correctly. As an independent ECO Window Systems service provider, we’re not affiliated with or authorized by the manufacturer, but we install, repair, and replace their units every week. Call (844) 761-9603 to schedule your free estimate.
How ECO Window Systems Products Fail – and How We Fix Them
ECO Window Systems builds impact-rated aluminum and vinyl products with a real following in the Southwest, and the failure patterns we see in Sunrise Manor are specific to how those units age in desert heat. Here’s what shows up on our diagnostics:
- Seal creep on radius and arched custom units. On ECO Window Systems’ arched and radius-top custom frames, the glazing gasket on the curved edge takes more thermal cycling than the straight runs – the curve flexes on a 115°F day and contracts hard overnight in January. Over five to eight years the gasket shrinks back from the radius and the unit starts whistling or leaking at the curve. We reseal with a gasket rated for that expansion range rather than a straight-run caulk that fails again within two seasons.
- Spacer discoloration and seal failure on oversized insulated units. Big custom picture openings in ECO Window Systems’ impact lines use wider sealed units, and those big IGUs are the first to fog when the edge seal gives out. Sunrise Manor homes on west-facing walls (a common orientation in neighborhoods off Lake Mead Boulevard) see this roughly twice as fast. We verify the seal is actually failed before recommending replacement of the whole unit – sometimes it’s only the perimeter glazing tape.
- Corner weld stress on angled and trapezoid frames. Geometric custom windows have more welded corners per unit than rectangles, and every weld is a potential point of air infiltration. When an ECO Window Systems trapezoid or angled unit underperforms, the culprit is usually a hairline crack at one weld that you can find with a smoke test in five minutes and miss entirely by eyeballing. We air-test before we touch anything.
- Hardware bind on large operable geometric units. Oversized casement and awning windows in ECO Window Systems’ custom lines get heavy fast, and the multi-point lock and hinge hardware wears faster than standard-size units. We replace with OEM or equivalent-rated parts; aftermarket hardware of the wrong load rating will bind within a year.
- Improper stucco-to-frame interface on the original install. This isn’t an ECO Window Systems defect – it’s an installation shortcut. On custom geometric units, the stucco return at the curve or angle is where water gets behind the frame. We flash it correctly on every replacement, and we pull permits for it.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our ECO Window Systems Custom & Geometric Windows Process
Here’s what a real ECO Window Systems custom job looks like from the first call to the last sweep of the driveway:
- 1
Phone and field measure. We answer live at (844) 761-9603, then come out for a field measure with the angles, radii, and jamb depths recorded to the sixteenth so the custom frame actually fits on the first try.
- 2
Diagnostic on the existing unit. Air test, moisture meter, and hardware inspection tell us whether we’re repairing what ECO Window Systems already put on the wall or replacing it. We tell you which one is worth your money.
- 3
Parts decision. On repairs we specify OEM parts when the unit is under warranty or the geometry is proprietary, and quality aftermarket when it’s a wear item we can match to spec. We explain the trade-off before you commit.
- 4
Written line-item estimate. Every cost is itemized – glazing package, frame finish, hardware, flashing, permit, labor. No surprise line at the end.
- 5
Install with permit and inspection. We pull the permit, install to manufacturer spec and local code, and pass inspection. Every technician is background-checked and arrives in uniform.
- 6
Water test and 36500-Day Done Right Promise. We hose-test the perimeter before we leave. If anything’s not right, we come back and make it right – and the promise doesn’t expire.
See the difference
Before
After
Before
After
Before
AfterWhat ECO Window Systems Custom & Geometric Windows Costs in Sunrise Manor
Here are real ranges for the jobs Sunrise Manor homeowners call us about. These are honest numbers for the current market, not teaser pricing:
- Repair of an existing ECO Window Systems custom unit (reseal, hardware, gasket): $180 – $650 per opening.
- Replacement of a standard rectangular ECO Window Systems impact window: $650 – $1,400 installed.
- Replacement of a curved, arched, or radius unit: $1,400 – $3,200 installed.
- Angled, trapezoid, or multi-sided geometric unit: $1,600 – $3,800 installed.
- Oversized picture opening (wide custom span): $2,800 – $4,500+ depending on glass package.
What moves the price: glass package (impact vs. energy-certified vs. both), frame finish, whether the stucco around the opening needs repair, and whether the opening is a straight swap or a new build-out. Multi-unit jobs price better per unit. Call (844) 761-9603 for your free estimate – we’ll quote it line by line before you sign anything.
Why Sunrise Manor Homeowners Call Winslow Windows & Doors Sunrise Manor for ECO Window Systems Work
Ed Winslow’s name is on every job. That means something in Sunrise Manor, where a handshake still counts and the person who answers the phone should be able to tell you who’s showing up at your door. We answer live 24/7, every technician is background-checked and arrives in uniform, and if the work isn’t done right we come back under the 36500-Day Done Right Promise. No national chain makes that offer because no national chain is accountable the way a locally owned company is.

We’re an authorized installer for eight premium window and door lines, including PGT, CGI, CWS, and ES Windows, so if ECO Window Systems doesn’t have the right unit for your opening, we have real alternatives to offer you honestly. Our technicians have up to 15 years of experience with custom geometry – curves, angles, oversized spans – and they know which unit fails and why. Upfront pricing, no trip charge inside our home county, $40 off any repair over $200, a free second opinion on any written estimate, and a 10% discount for seniors and veterans. All permanent, all the time.
FAQs
Is my ECO Window Systems warranty still valid if I hire an independent installer? Usually yes – the manufacturer’s warranty on the product travels with the unit, not the installer, but a failed installation can void the coverage on the workmanship. We install to manufacturer spec and document the install so the warranty stays intact. Call (844) 761-9603 to talk through what your warranty covers.
How fast can you get parts for a custom ECO Window Systems unit? OEM parts on arched and geometric custom units typically run two to four weeks; standard wear items often less. We tell you the lead time up front before you commit to a repair.
Should I repair or replace my custom ECO Window Systems window? Repairs usually win when only hardware, gaskets, or glazing tape are failing – often $200 – $650. Replacement wins when the sealed unit has fogged or the frame weld has cracked. We test before we recommend, and we’ll tell you if a repair is the smarter move.
Do you pull permits for custom window replacements in Sunrise Manor? Yes. We pull the permit and pass inspection on every replacement, and we flash the stucco properly so the curve or angle doesn’t leak behind the frame. A quote that skips permits is a quote that skips accountability.
How long does a custom ECO Window Systems job take in Sunrise Manor? Four to eight weeks from field measure to final inspection, depending on geometry and glass package. Every step is scheduled with you, and we don’t disappear mid-job.
If you’ve got an ECO Window Systems custom window that’s fogged, leaking, or just not performing the way it should, call (844) 761-9603 for a free estimate. We’re the one down the road.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.