Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Sliding & Patio Doors: The Sunrise Manor Owner’s Guide
If the rollers on your CWS sliding or patio door have gone gritty and the panel grinds or jumps the track, we install CWS-compatible sliding door replacement and parts in Sunrise Manor, and most full door replacements run roughly $1,800 to $4,500 installed depending on size and glass package. A single roller or track repair is far less, often $150 to $350 installed. Homeowners here usually find out the hard way: a door that used to glide with one finger starts needing a shoulder, then the frame starts dragging and the latch stops lining up.

Sunrise Manor sits in one of the harshest dust-and-heat environments in the valley, and that combo wears sliding hardware faster than most of the country. We’re an independent service provider, not affiliated with CWS, so the recommendations below are based on what we actually see when we open these doors up.
Which CWS Models This Applies To
CWS built sliding and patio doors across a spread of series over the years, and the hardware inside them is not universal. Roller assemblies, keepers, handles and screens change by series and by vintage, and two doors that look identical from the curb can take completely different roller sets. That’s the first compatibility gotcha most Sunrise Manor owners hit: they order a roller that “fits CWS sliding doors,” and it doesn’t clear the bottom rail on their specific panel.
The reliable path is to identify the door before ordering. Check the etched label or sticker on the glass edge or the jamb, note the panel width and the height of the bottom rail, and measure the roller housing if you can see it. On older CWS units the glass is often the best identifier.
On the OEM-versus-aftermarket question: CWS factory parts are worth it for handles, latches and locking hardware where fit and finish matter, and where a model is still supported. For rollers and tracks, a quality aftermarket equivalent from a maker that specs stainless bearings usually outlasts the original, which matters in Vegas heat. We don’t claim any local stock of CWS parts and we don’t carry parts on a truck. We source the correct part to your model, so ordering is right the first time instead of the third.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CWS Sliding & Patio Doors Is Failing
Sliding hardware fails in stages. Catching it at the first symptom saves you from a full door replacement. Here’s what we see most in Sunrise Manor:
- The panel needs two hands and a shove. That’s worn or flat-spotted rollers or a track packed with grit. In our dust, tracks load up fast, and grinding the panel over that grit flattens the roller wheels.
- A scraping or metal-on-metal sound as it rolls. The roller is seizing or has lost its bearing, and the panel is now riding metal on metal. Keep using it and it chews the bottom rail and the track too.
- The door jumps or falls out of the top track. Usually a worn top guide or a sagging frame from the thermal cycling this valley throws at aluminum and vinyl. That’s a safety issue, not a squeak.
- The latch won’t catch or the lock drags. A misaligned panel, worn keeper or a strike that’s shifted with the frame. This one affects security, so it’s worth fixing promptly.
- Drafts, water stains or a visible gap at the bottom. Failed weatherstripping, sweeps or the track itself. In summer, that gap lets cool air out and heat in, and monsoon season finds every opening.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s honest installed pricing for Sunrise Manor, parts and labor together. These ranges depend on the part and the door.
| Job | Typical installed range |
|---|---|
| Roller replacement (both rollers, one panel) | $150 – $300 |
| Roller plus track repair | $250 – $450 |
| Handle, latch or lock replacement | $120 – $280 |
| Weatherstripping / sweep / screen | $100 – $300 |
| Full CWS-compatible sliding door replacement | $1,800 – $4,500 |
What drives the range: door size, glass package (impact-rated glass and energy-certified options land at the top), whether the frame is still sound, and whether the track needs rebuilding. We give written line-item pricing upfront, so parts and labor are broken out and you see exactly what you’re paying for. No surprises on the invoice. Every job is backed by our 36500-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some of this is safe to handle yourself. Clearing dust and grit from the track, vacuuming the channel, wiping the rollers clean, and checking that the latch lines up are all reasonable weekend checks, and they’ll extend the life of the hardware. Tightening a loose handle or swapping a screen is fine too.
Where DIY goes wrong is the roller swap and any track work. Lifting a tempered-glass sliding panel out of its frame on a stepladder is how people end up with a shattered panel and a cut arm, and older panels can be heavy. Set a panel down wrong and you can crack it, or bend the frame so it never rolls right again. For anything that means lifting the panel or touching the track, call us at (844) 761-9603. A repair over $200 gets $40 off, and estimates are free with a written line-item quote.
FAQs
Original rollers typically run 10 to 15 years, but in this heat and dust we commonly see Sunrise Manor rollers fail closer to 8 to 12 years. UV exposure and fine desert grit wear the rollers and weatherstripping faster than the national average. Call (844) 761-9603 for an exact quote on a replacement.
Yes, most sliding door problems come down to rollers, track, weatherstripping or hardware, and those can be repaired without a new door. If the frame is sound, we fix the part and save you the cost of a full replacement. Call (844) 761-9603 and we’ll give you an honest read on repair versus replacement.
A roller or hardware swap on a CWS sliding door usually takes an hour or two per panel once we have the right part. Track repairs and full door replacements take longer, so plan for a half day or more. We’ll confirm timing in your written estimate.
We identify your CWS model from the door label, glass and panel measurements, then order the correct roller, track or hardware to that model. OEM parts where they matter, quality aftermarket hardware for rollers and tracks. Call (844) 761-9603 to get the part matched to your door.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.