Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Impact Windows in Sunrise Manor: What to Know First
We install and service CGI impact windows in Sunrise Manor, and most single-window jobs are measured and completed within a couple of weeks of your call, depending on product lead times. Expect a written, line-item quote before any work begins – no change orders once we start. As an independent CGI service provider, we’re not affiliated with or authorized by CGI, but our technicians have up to 15 years of experience working with the brand across the Las Vegas Valley. This page is for homeowners with CGI windows already in the wall, or those who want CGI glass installed on a Sunrise Manor home. Call (844) 761-9603 to schedule a free estimate.

How CGI Products Fail – and How We Fix Them
CGI builds a solid impact window, but the way those units age in Sunrise Manor’s sun and wind is specific – and so are the fixes. Here’s what our technicians see most often.
- Seal failure and fogging between panes on CGI double-pane impact glass. Our desert swing between 40-degree nights and 105-degree afternoons flexes the edge seal, and once the argon escapes you’ll see haze creeping in from a corner. The window isn’t failing structurally – the sealed unit is. We replace the insulated glass unit and keep the CGI frame in place, which protects your warranty and your wall opening.
- Weatherstripping and weep-system breakdown on CGI sliding glass doors. The sliding tracks and drain channels on CGI patio and slider units collect fine dust from spring wind events across the east valley, and once the weep holes clog, water backs up and rots the sill shims. We clear, re-seal, and replace the pile weatherstripping – a fix most homeowners don’t know exists until the carpet gets wet.
- Roller and track wear on CGI horizontal sliders. Sunrise Manor grit works into the roller track and the sash starts dragging or popping out of alignment. We pull the sash, replace the rollers with quality aftermarket hardware, and true the track rather than forcing the sash – forcing it is what cracks the impact glass.
- Screen frame and mesh damage after monsoon wind. The added mass of impact-rated screens means the frames take more torque in a gust. We re-screen with impact-rated mesh and check the frame anchors against the CGI spec so the assembly stays intact.
- Improper flashing at the rough opening from an earlier install. We regularly find CGI units set without a proper sill pan on older Sunrise Manor homes. The glass is fine; the water path behind it isn’t. We reset the opening with correct flashing and keep the existing CGI product when it’s sound.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Impact Windows Process
- 1
Call and diagnosis. A live person answers 24/7. We ask what’s failing and when, and set a time for a technician to look at the CGI unit in person.
- 2
In-home assessment. Our background-checked, uniformed technician checks the glass, seals, frame, flashing, and hardware, and tells you plainly whether the CGI window can be repaired or should be replaced.
- 3
Parts decision. We favor OEM CGI parts when the unit is still under manufacturer warranty, because aftermarket hardware can void it. Outside warranty, we use quality aftermarket parts that meet the same spec and explain the trade-off in writing.
- 4
Written, line-item quote. Every part and every hour is priced before we start. No surprises on the invoice.
- 5
The work and the test. We install, then water-test and operate every sash and slider to confirm the seal, drain, and hardware all perform before we call it done.
- 6
Cleanup and guarantee. We haul away old glass and debris, then back the job with our 36500-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Impact Windows Costs in Sunrise Manor
Prices follow the Sunrise Manor market, not a national average. These ranges reflect what common CGI work runs here.
- Replace a failed sealed glass unit (IGU) in an existing CGI frame: $320 – $680 per window.
- Repair slider rollers and track on a CGI patio door: $180 – $340.
- Re-seal flashing and reset a rough opening: $250 – $600 depending on access.
- Full CGI impact window installation, new or replacement: $650 – $1,400 per opening, with size and product line moving the number.
What moves the price: window size, whether we’re keeping the existing frame, the CGI product line you choose, and how many openings we do in one visit. Call (844) 761-9603 for an exact quote – estimates are free, and our second opinion on any written estimate you already have is free too.
Why Sunrise Manor Homeowners Call Winslow Windows & Doors Sunrise Manor for CGI Work
Ed Winslow’s name is on the door, and on every job we do – so when something isn’t right, you’re calling a locally owned business, not a national call center. We answer the phone live, 24 hours a day, and our technicians arrive background-checked and in uniform, so you know who’s at your door before the truck pulls up. Our techs have up to 15 years of experience with impact windows and know CGI’s failure points in this climate. And if CGI doesn’t fit your job, we’re a multi-brand installer for PGT, CWS, ES Windows, and ECO Window Systems, so we can point you to the right product honestly. We stand behind the work with the 36500-Day Done Right Promise, and our standing offers – $40 off any repair over $200, no trip charge inside the home county, and 10% off for seniors and veterans – are always available, not a limited-time pitch. We’re the one down the road.
FAQs
Not if the work is done to CGI’s spec. Replacing just the insulated glass unit while keeping the frame and using OEM-spec parts usually preserves the manufacturer warranty. We check your unit’s warranty status before deciding between OEM and aftermarket, and put that reasoning in writing. Call (844) 761-9603 for a free estimate.
Yes, we source OEM CGI parts for warranty-safe repairs, though lead times vary by model line. When a part is back-ordered or the unit is out of warranty, we offer quality aftermarket equivalents that meet the same spec and explain the difference. Call (844) 761-9603 to check availability.
Repair is usually the right call when the frame is sound and only the glass, seals, or hardware have failed. Replacement makes more sense when flashing was never done right or the frame itself is compromised. Our technician tells you which it is, in plain terms, during the free estimate. Call (844) 761-9603.
A single IGU replacement or slider repair is typically a same-visit fix; full window installs depend on product lead time and the number of openings. We confirm a realistic timeline in your written quote, not a sales promise. Call (844) 761-9603 to schedule.
No. We give you a written, line-item quote before we begin, and fixed pricing means no change orders on the work we quoted. Anything we discover mid-job that wasn’t in the quote gets your approval first. Call (844) 761-9603 for your free estimate.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.