Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Door Installation: The Sunrise Manor Owner’s Guide
PGT door installation in Sunrise Manor typically runs $1,800 to $4,600 installed for a standard hinged or sliding unit, and we can often schedule the work the same week you call. We install PGT-compatible door systems and door hardware for Sunrise Manor homes, and we’ll tell you plainly when a part swap beats a full door replacement. Homeowners here usually find out something’s wrong the hard way: a sliding door that won’t latch in August, a hinge that sags after monsoon season, or a threshold that drips when the wind pushes rain sideways. Sunrise Manor sits in one of the harshest sun-and-heat zones in the Las Vegas Valley, and PGT doors take a beating here that they don’t take in milder markets.

Which PGT Models This Applies To
PGT makes impact-rated doors across several product families, and the door hardware, thresholds, rollers, and frames don’t cross over cleanly between them. The sliding patio doors (the WinGuard lines many Sunrise Manor homes have) use different roller assemblies and track profiles than the hinged entry and French door units. Before we quote anything, we pull the model number off the label inside the door jamb or frame, then measure the opening, the panel thickness, and the hinge or track spacing. That label is the single most useful thing you can text us a photo of.
On the OEM-versus-aftermarket question, our stance is practical. PGT factory parts are the right call on impact-rated glass, locking hardware, and anything tied to the door’s rated performance. For wear items like rollers, weatherstripping, and bumpers, a quality aftermarket equivalent often fits and lasts as well for less money. We’ll tell you which is which for your specific unit rather than upselling the factory part on everything.
If your PGT door is beyond a part fix, we also work with CGI, CWS, and ES Windows door lines. Winslow Windows & Doors is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your PGT Door Installation Is Failing
- The sliding panel drags or jumps the track. Worn or flat-spotted rollers are almost always the cause, and in Sunrise Manor the heat accelerates it: nylon rollers that last years elsewhere can go brittle and crack faster in the dry, 110-degree summers.
- Water shows up at the threshold during monsoon. Failed weatherstripping, a worn sill seal, or a threshold that’s lost its seal lets wind-driven rain in. On a PGT impact door, a compromised sill also compromises the door’s rated performance.
- The door won’t latch, or latches only with a shove. That’s usually a sagging hinge or a shifted strike plate, not a lock problem. Hinged PGT entry doors are heavy, and hinges carry more load when they’re installed without shims taking the weight.
- You feel heat radiating from the frame or glass edge. A failed seal or degraded gasket around the panel lets conditioned air escape. In this climate that shows up as a hot frame and a rising power bill before you see any visible gap.
- Fogging or a milky haze between the glass panes. That’s a broken seal in the insulated glass unit. It’s not a cleaning problem and it won’t clear on its own; the unit needs replacing to restore the seal.
Replacement Cost & What’s Included
Here’s what PGT door work runs for Sunrise Manor homeowners, parts and labor together:
| What you’re getting | Typical installed range |
|---|---|
| Wear parts (rollers, weatherstripping, seals) and adjustment | $150 – $400 |
| Hardware swap (handles, locks, hinges) | $250 – $600 |
| Insulated glass unit replacement | $450 – $1,200 |
| Full door replacement, standard unit | $1,800 – $4,600 |
What moves the number: door size, door type (sliding doors cost more in labor than a single hinged door), whether the work is impact-rated, and whether the frame needs shimming or repair. We give you a written line-item quote before any work starts, so you see the part cost and the labor cost separately. There’s no trip charge inside the home county, and the work is backed by our 36500-Day Done Right Promise: if something isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do a few things yourself: check that the track is clear of grit, tighten a loose handle, look for the model label, and note where the door sticks or leaks. That’s diagnostics, not repair. Where DIY goes wrong on PGT doors is the heavy stuff: impact-rated panels are heavy, the glass units are sealed and can’t be re-gasketed by hand, and reseating a sliding panel wrong can crack a roller or warp the track. Misinstalled hardware on a security door is a real risk, not a cosmetic one. We have technicians with up to 15 years of experience, and every technician is background-checked and arrives in uniform. Call (844) 761-9603 and we’ll give you a straight answer on whether you’re looking at a part, a panel, or a whole door.
FAQs
How long does a PGT door last in Sunrise Manor? A well-installed PGT impact door typically holds up 20 to 30 years, but wear parts like rollers, seals, and weatherstripping usually need attention every 7 to 12 years. Our desert heat and UV shorten that timeline, so expect the wear items on the shorter end of the range in Sunrise Manor.
Can you repair the part instead of replacing the whole door? Yes, in most cases. Rollers, hinges, locks, weatherstripping, and insulated glass units are all fixable while keeping the door. We only recommend full replacement when the frame is bent, the door has lost its impact rating, or the repair cost approaches the cost of a new unit. Call (844) 761-9603 for an exact quote, and estimates are free.
How long does the swap take? A parts or hardware swap usually takes one to three hours, and an insulated glass unit swap runs about two to four hours. A full door replacement is typically a full day. We schedule it and confirm before we start.
How do you source the PGT part? We pull the exact model and serial off your door’s label, match it to the right PGT or quality aftermarket component, and order it specifically for your unit. We don’t guess from a photo alone, and we don’t carry stock on a truck. If a factory part has a lead time, we tell you that upfront.
Talk to Us About Your PGT Door
If a PGT door in your Sunrise Manor home is dragging, leaking, fogging, or won’t latch, we’ll find out exactly what’s failing and quote you honestly before any work begins. Call (844) 761-9603 for a free estimate, free second opinions on written estimates, no trip charge inside the home county, and 10% off for seniors and veterans. Ed’s name is on the door, and on every job we do. We’re the one down the road.
Written by the team at Winslow Windows & Doors Sunrise Manor, serving Sunrise Manor and nearby areas.