A Winslow company - serving Sunrise Manor, NV

PGT Window Installation in Sunrise Manor, NV

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

PGT Window Installation: The Sunrise Manor Owner’s Guide

PGT window installation in Sunrise Manor usually runs $650 to $1,900 per window fully installed, depending on series, glass package, and whether we’re swapping an existing PGT unit or roughing in a new opening. We handle PGT replacement windows, PGT impact units, and part-matched swaps on WinGuard and Aluminum series windows, and estimates are free. Most Sunrise Manor owners don’t set out to shop for windows. They notice something first: a sash that won’t seat, fog between the panes, a crank that grinds, or a latch that stopped catching after a summer of 110-degree days. That one symptom is how the search starts, and it’s usually the point where a PGT-specific answer beats a generic one.

Modern black impact window and door system frame detail. in Sunrise Manor, NV

Call (844) 761-9603

Winslow Windows & Doors Sunrise Manor is an independent service provider. We install PGT products, but we’re not affiliated with PGT and we don’t speak for the manufacturer.

Key Takeaways

  • Installed PGT window pricing in Sunrise Manor typically lands between $650 and $1,900 per unit.
  • PGT part numbers follow series, not just size. A tape-measure match alone will leave you with the wrong sash.
  • Nevada heat and monsoon dust shorten seal life. Fifteen to twenty years is realistic for glass seals here, not the thirty you may hear quoted.
  • Impact glass and non-impact glass are not interchangeable in the same PGT frame.

Which PGT Models This Applies To

PGT builds several distinct window families, and the parts inside them don’t cross over. The two most common in Sunrise Manor homes are the WinGuard impact line and the Aluminum series (including the 700 and 800 aluminum single-hung and horizontal roller lines). WinGuard units use laminated or laminated-insulated glass with a heavier sash and a different balance system than standard aluminum. If you order a replacement sash for an aluminum 700 but your window is actually a WinGuard unit, it will not seat, and the seal will fail again within a season.

Start at the label. PGT puts a certification and identification label in the window head jamb or on the sash edge, and it carries the series, the glass code, and the manufacture date. Photograph it before anything else. If the label is gone, we measure the rough opening and the visible glass, then match the profile: sash thickness, balance pocket depth, weep position, and screen track. Sunrise Manor has a lot of 1990s and early-2000s tract housing where the same floor plan got two different window series depending on the build phase, so the neighbor’s window is not proof of yours.

On the OEM-versus-aftermarket question: for PGT, OEM is the safer call on sash and glass, because the profiles are proprietary and the impact rating is tied to the assembly. Aftermarket is fine for hardware (cranks, locks, rollers, weatherstrip) where a quality equivalent matches the spec. We’ll tell you which side of that line your part falls on before you spend anything.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Signs Your PGT Window Installation Is Failing

  • Fogging or a milky haze between panes. The perimeter seal on the insulated glass unit has let moisture in. In Sunrise Manor’s summer heat cycling, that seal takes a beating, and once it goes, the unit has to be replaced, not dried out.
  • A crank that grinds or a sash that won’t stay up. The operator or balance has worn past adjustment. Cheap to fix early, expensive once the sash drops and cracks the frame.
  • Water staining at the interior sill after monsoon season. Often a failed weep system or deteriorated glazing bead, not a roof leak. Worth diagnosing properly before anyone sells you a roof.
  • Drafts or hot spots near the frame, not the glass. That’s usually weatherstrip and shimming at the frame, which points to the original install rather than the window itself.
  • A latch that won’t catch or a screen that won’t track. Hardware wear, common on west-facing windows that take the full afternoon sun.

One pattern we see repeatedly in Sunrise Manor: homes built in the late 1990s along the older tracts near Nellis have original PGT aluminum units where the glazing bead has gone brittle from two decades of UV. The glass is fine and the frame is fine, but the bead crumbles when touched. That’s a repair, not a replacement, and it’s worth knowing before a salesperson tells you otherwise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for a PGT window in Sunrise Manor runs roughly $650 to $1,900 per window. A standard aluminum single-hung with clear or low-E glass sits at the low end. A WinGuard impact unit with laminated glass, a larger rough opening, or a second-story install with stucco work pushes toward the top. Odd sizes, custom color, and tempered glass for a bathroom add to it.

Item Typical range
Standard PGT aluminum single-hung, installed $650 – $1,100
PGT horizontal roller or slider, installed $750 – $1,400
PGT WinGuard impact unit, installed $1,100 – $1,900
Hardware-only repair (crank, lock, roller, weatherstrip) $150 – $400
Glass-only swap on a sound frame $300 – $700

Those ranges include removal and disposal of the old unit, standard flashing and sealing, and cleanup. We write line-item estimates so you see parts and labor separately, and the price on the estimate is the price on the invoice. Workmanship is covered by the 36500-Day Done Right Promise: if it’s not done right, we come back and make it right. We don’t stock parts and we don’t carry them on a truck, so every part is ordered to your window’s actual spec.

Modern black impact window and door system frame detail. in Sunrise Manor, NV

DIY or Call Us?

There’s a safe middle ground here, and it’s worth taking. You can photograph the label, measure the visible glass and the rough opening, clean and lubricate a track, check that the weep holes are clear, and test whether a draft is coming from the glass or the frame edge. That information makes any quote more accurate, whether you hire us or not.

Where it goes wrong: glass handling and sash removal. An insulated PGT unit is heavy, awkward, and unforgiving if it twists on the way out. Dropping one on a tile floor or a foot is the usual outcome, and a chipped edge on laminated impact glass means the whole unit gets replaced anyway. Replacing a failed balance or operator without the right tool also tends to crack the frame pocket. If your window is above the first floor, or the frame is already showing rot or movement, that’s a stop sign.

We’ll give you a free second opinion on any written estimate you’ve already got. Call (844) 761-9603 and a real person answers, any hour.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (844) 761-9603
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Winslow Windows & Doors Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch